VF-600 Vertical Machining Center
Product Features
- High strength and lightweight spindle box construction
- Perfect combination of fine cutting and roughing capabilities
- Integrated design of water flushing disc and casting
- Double pre-tensioned screw effectively resists high-load impact
- Compact footprint with exceptional functionality and higher efficiency per unit area
Technical Specifications
| Item |
Unit |
VF-600 |
| System |
CNC System |
FANUC |
| Rapid Speed |
mm/min |
48000/48000/48000 |
| Cutting Feed Speed |
mm/min |
1-10000 |
| 3-Axis Rated Power |
Kw |
1.2/1.8/3.0 [Note①] |
| 3-Axis Rated Torque |
N.m |
7.0/11.0/20.0 [Note①] |
| Worktable T-Slot Dimensions |
- |
3-14-125 |
| Worktable Dimensions |
mm |
700*420 |
| Max Worktable Load |
Kg |
500 |
| 3-Axis Travel |
mm |
600*400*450 |
| Distance from Spindle Nose to Worktable |
mm |
120-570 |
| Spindle Power |
Kw |
5.5-7.5 |
| Max Spindle Speed |
rpm |
10000(Belt)/12000(Direct Drive)/15000(Direct Drive) |
| Spindle Taper |
- |
BT40 [Note②] |
| Screw Diameter/Pitch |
mm |
Φ32D16/Φ32D16/Φ32D16 |
| Linear Rail Brand/Type/Width |
- |
PMI Ball 30mm/PMI Ball 30mm/PMI Ball 35mm [Note③ Note④] |
| Number of Rails/Sliders |
Pcs |
2-4/2-4/2-4 |
| Tool Magazine Capacity |
Pcs |
16 [Note⑤] |
| BT/BBT Pull Stud Angle |
° |
45° |
| Max Tool Diameter |
mm |
Φ90(Full Magazine)*Φ175(Empty Adjacent Tool) |
| Max Tool Length/Weight |
mm/kg |
300/8 |
| Tool Change Time |
s |
1.3 |
| Automatic Chip Removal |
- |
Rear Flushing |
| Automatic Lubrication System |
- |
Thin Oil Lubrication |
| Electrical Cabinet Cooling |
- |
Heat Exchanger |
| Positioning Accuracy (Full Travel) |
mm |
0.008 |
| Repeat Positioning Accuracy (Full Travel) |
mm |
0.005 |
| Air Supply Flow/Pressure |
- |
Flow 150(L/min)/Pressure(6Bar) |
| Total Power |
Kw |
15 |
| Machine Weight |
Kg |
4500 |
| Machine Overall Dimensions (L*W*H) |
mm |
2050*1830*2450/2050*2500*2450(Including Water Tank) |
Standard Configuration
Umbrella-shaped servo tool magazine,Rear-flush chip removal,Spindle oil cooler,Water gun,Air gun,Spindle air curtain,Spindle ring spray,Centralized lubrication,Air source treatment,Oil-water separation,Heat exchanger
Optional Configuration
Mitsubishi/Syntec system,Hollow screw,Grease lubrication,Electrical cabinet air conditioner,4-axis or 5-axis capability,Column heightening,Tool internal cooling,Fixtures and clamps
※ The product appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.
Note①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note②: Optional BT30 spindle
Note③: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given
Note④: Optional PMI cylindrical linear rails or THK cylindrical linear rails
Note⑤: Optional 20-tool capacity for the tool magazine
